 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| RIGHT ANGLE SURFACE MOUNT INFRARED EMITTING DIODE QTLP610CIR PACKAGE DIMENSIONS 0.126 (3.2) 0.110 (2.8) 0.043 (1.1) 0.035 (0.9) FRONT 0.020 (0.50) 0.087 (2.2) 0.071 (1.8) 0.087 (2.2) 0.071 (1.8) 0.039 (1.0) TOP 0.035 (0.9) R0.017 (0.4) POLARITY MARK BACK 0.016 (0.4) 1 - + POLARITY 2 NOTE: 1. Cathode 2. Anode 3. Dimensions for all drawings are in inches (mm). FEATURES * * * * * * Right Angle Surface Mount Package Available in 0.315" (8mm) width tape on 7" (178mm) diameter reel; 2,000 units per reel Wide Viewing Angle 160 Wavelength = 940 nm, GaAs Water Clear Lens Matched Photosensor: QTLP610CPD (c) 2003 Fairchild Semiconductor Corporation Page 1 of 6 1/5/04 RIGHT ANGLE SURFACE MOUNT INFRARED EMITTING DIODE QTLP610CIR ABSOLUTE MAXIMUM RATINGS (TA = 25C unless otherwise specified) Parameter Operating Temperature Storage Temperature Soldering Temperature (Iron)(1,2,3) Soldering Temperature (Flow)(1,2) Continuous Forward Current Reverse Voltage Power Dissipation(4) Peak Forward Current (Pulse width = 100s, Duty Cycle=1%) Notes: 1. RMA flux is recommended. 2. Methanol or isopropyl alcohols are recommended as cleaning agents. 3. Soldering iron tip at 1/16" (1.6mm) from housing 4. At 25C or below Symbol TOPR TSTG TSOL-I TSOL-F IF VR PD IFD Rating -40 to +85 -40 to +90 240 for 5 sec 260 for 10 sec 65 5 100 1.0 Unit C C C C mA V mW A ELECTRICAL / OPTICAL CHARACTERISTICS (TA =25C) PARAMETER Peak Emission Wavelength Emission Angle Forward Voltage Reverse Current Radiant Intensity Rise Time Fall Time IF = 20 mA IF = 20 mA IF = 20 mA IF = 100 mA, tP = 100 s, Duty Cycle = 0.01 IF = 1 A, tP = 100 s, Duty Cycle = 0.01 VR = 5 V IF = 20 mA IF = 100 mA, tP = 100 s, Duty Cycle = 0.01 IF = 1 A, tP = 100 s, Duty Cycle = 0.01 IF = 100 mA tP = 20 ms tr tf Ee IR VF TEST CONDITIONS SYMBOL P MIN. -- -- -- -- -- -- 0.5 -- -- -- -- TYP. 940 80 1.2 1.4 2.6 -- 0.8 4.0 40 1 1 MAX. -- -- 1.5 1.85 4.0 10 -- -- -- -- -- s s mW/sr A V UNITS nm Deg. (c) 2003 Fairchild Semiconductor Corporation Page 2 of 6 1/5/04 RIGHT ANGLE SURFACE MOUNT INFRARED EMITTING DIODE QTLP610CIR TYPICAL PERFORMANCE CURVES Duty Cycle=0.01 -30 -20 -10 0 10 20 30 1.0 0.9 0.8 0.7 40 50 60 70 80 25 50 75 100 120 (c) 2003 Fairchild Semiconductor Corporation Page 3 of 6 1/5/04 RIGHT ANGLE SURFACE MOUNT INFRARED EMITTING DIODE QTLP610CIR RECOMMENDED PRINTED CIRCUIT BOARD PATTERN 0.035 (0.90) 0.035 (0.90) 0.008 (0.20) 0.008 (0.20) 0.059 (1.50) 0.059 (1.50) 0.035 (0.90) Light Emitting Direction 0.035 (0.90) 0.079 (2.00) 0.079 (2.00) 0.197 (5.00) 0.197 (5.00) Mounting Example RECOMMENDED IR REFLOW SOLDERING PROFILE 5 sec MAX soldering time 240 C MAX +5 C/s MAX -5 C/s MAX 60 - 120 sec Preheating 120 - 150 C MAX (c) 2003 Fairchild Semiconductor Corporation Page 4 of 6 1/5/04 RIGHT ANGLE SURFACE MOUNT INFRARED EMITTING DIODE QTLP610CIR TAPE AND REEL DIMENSIONS 8.4 +1.5 -0.0 11.0 5 0. 2.5 +0.5 -0.0 O12.75 +0.25 -0.0 Progressive direction 1.75 2.00.05 4.0 2.5 0 0.5 O62.00.5 O1801 O1.55.05 0.230.1 3.50.05 8.0 - 4.0 2.06 1.32 + Polarity Dimensional tolerance is 0.1mm unless otherwise specified Angle: 0.5 Unit: mm (c) 2003 Fairchild Semiconductor Corporation 3.20 Page 5 of 6 1/5/04 RIGHT ANGLE SURFACE MOUNT INFRARED EMITTING DIODE QTLP610CIR DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. (c) 2003 Fairchild Semiconductor Corporation Page 6 of 6 1/5/04 |
Price & Availability of QTLP610CIR
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |